Constructed from ultra-durable 30 Denier Nylon 6.6 Ripstop, The Eight Person Lightweight Tipi is roomy, storm worthy and offers stand up & walk around space. This versatile 8 man tent combines the spacious comfort of a family camping shelter with the rugged performance of a backcountry hunting tent. Designed as a premium 8 man tipi, it features weather-resistant construction that stands up to winter adventures and late season storms.

This sustainable four-season shelter excels as both a base camp and expedition tent, offering exceptional livable space. Perfect for hunters, outdoor enthusiasts, and adventure families, it sleeps eight with gear or four with a wood stove - the ultimate blend of traditional tipi comfort and modern tent technology for serious backcountry use.

Handmade in Grand Junction, CO.

FEATURES:

Flexi Pitch: Convert 8 person tipi into 6 person by pitching with just guy out points for group size versatility.

Sod Skirt: Fabric skirt on the bottom of the tipi to keep out dirt, drafts, and insects.

Dual Zippered Doors With Rain Flaps for easy access from either side and waterproofness.

Stove Jack With Rain Flap for use of a wood burning stove.

Peak Vent for ventilation and condensation prevention.

Hang Loops: to attach 8 Person Liners, gear, and accessories inside tent, keeping items off the ground.

SIZE GUIDE:

Sleeps 8 without stove
Sleeps 4 with stove
Sleeps 2 standard cots with a stove
Need one size smaller? See the 6 Person Tipi
Need one size bigger? See the 12 Person Tipi

SPECIFICATIONS:

Weight:

Canopy: 68 oz / 4 lb 4 oz
Complete weight - canopy, stakes, carbon pole - 111 oz / 6 lb 15 oz

Door screens add 14 oz
Aluminum pole adds 11 oz

Dimensions:

Height: 8' 6″
Diameter: 16'
Square Feet: 195
Square Feet Sitting Area (height above 36"): 84
Square Feet Standing Area (height above 6 ft): 27

MATERIALS:

Tent Fabric

30 Denier Nylon 6.6 Ripstop

3000 mm hydrostatic head
33% more abrasion resistant than nylon 6
Ripstop woven, Silicone coated

Stove Jack

Silicone-coated Fiberglass

3,000 f melting point
Tear and heat resistant material

Peak Cone

VX42 Xpac, Dyneema

2 layered fabrics for extreme tear strength
Fray and Abrasion Resistant

COMES WITH:

Aluminum Pole - 6 sections
10 twisted stakes and 10 standard stakes.
Silnet Seam Sealer

PITCHING:

Put in the primary door stake.
Take the opposite door stake loop and stretch the tipi out taut (not stretched). Decide where you want to sleep or where to place the stove.
Place your hand on the door guyout, fold the fabric towards the opposite door. The guyout is the middle of the fold. The stake loop lands very close to the proper setback. (Setback is 2X distance from guyout to sod skirt below stake loop in door.)
Start setting the seam stake loops next to the doors first, then move from door to door, using the side setbacks.
The recommended setbacks are for a standard no guy out pitch. If you want more space or better snow shedding, move the setbacks in towards the center by 1-2 inches from the recommended setback, raise the pole by an inch, and use the side guy outs.

Watch Here!

SEAM SEALING:

To seal the shelter, pitch it normally and seal the outside seams. Note: this is difficult on taller tents
You can run a thin bead of sealant along the seam, press it in with a finger, and wipe away excess on a paper towel.
Alternatively, you can use an acid brush from a hardware store to spread the sealant.

Seam Sealing Service