The Redcliff is a pyramid / tipi hybrid suitable for sleeping 3 - 6 adults. Capable of using a nest on each end or liners, the Redcliff easily adapts to every season. With its rectangular footprint the Redcliff pitches faster than a tipi and its angular panels shed weather better than a plain pyramid. A steep, symmetrical profile and integrated sod skirts further enhance weather resistance. The Redcliff is equally at home as a base camping shelter while hunting, or a ultralight backpacking shelter when shared by a larger group.

This item is only available in limited drops. Join the waitlist here or Call to be added to the waitlist 970.208.8108 or follow us on social media for updates.

Handmade in Grand Junction, CO.

REDCLIFF FEATURES:

Dyneema® Ct2e.08 - Color Spruce Green
Sod Skirt
Line Loc - Cordage 3mm Stake outs
Single Zippered Door With Rain Flaps
Stove Jack Located near peak cone, parallel to short side. (Same as Redcliff 6p)
Peak Vent
Hang Loops
Six Guyout Points
Seams are factory sealed. Additional seam sealing is not necessary

Stove FEATURES:

Titanium construction
Intake control
Sliding door
Damper with integral spark arrestor
Stove packs down to roughly 10.25" X 14" X .75" tall
Stovepipe rolls up to roughly 9.5" long cylinder 2.5" in diameter (held in place by pipe rings)

STOVE INFORMATION FOR DYNEEMA SHELTERS:

Dyneema® will not burn or propagate a flame however it does have a lower melting point. Due to the lower melting point, we recommend you do NOT use the anything that inhibits sparks from moving away from your tent such as a rain cap. We also do not recommend burning duraflame logs, or real pitchy wood or accelerants that can create a lot of soot. Use a spark arrestor. For the Redcliff a slightly longer stove pipe is not a bad idea (such as 8 Ft ) .

When using a wood stove in your Dyneema® tent, please be aware of the potential risks of heat damage. Dyneema, while incredibly strong and lightweight, is not heat-resistant and can melt or weaken when exposed to high temperatures. Prolonged heat from a stove or chimney, or direct contact with sparks or embers, can cause irreversible damage to the tent fabric, compromising its integrity and performance.

To minimize risks:

Always use a stove jack and heat-resistant barriers where the chimney passes through the tent.

Maintain proper clearance between the stove, chimney, and tent walls.

Monitor the stove constantly and ensure adequate ventilation.

Dyneema® tents are a significant investment, and heat damage is not covered under warranty. For your safety and to protect your tent, we recommend exercising extreme caution.

REDCLIFF SPECIFICATIONS:

Weight:

Complete weight - canopy, stakes, carbon pole - 50 oz

Dimensions:

Height 6' 8″
102" by 156" footprint (corner to corner), 130" by 178" center to center
132 sq ft

SIZE GUIDE:

Sleeps 6 without stove
Sleeps 3 with stove
Sleeps 2-3 ultralight short cots with a stove
Need one size smaller? See the Cimarron Ultralight
Need one size bigger? See the 8 Person Tipi
Similar size in a tipi shape? See the 6 Person Tipi

PITCHING:

The Redcliff is a rectangle based structure and is therefore easy to pitch.

Pick your sleeping area and desired door location - this dictates how you pitch the shelter.
Stake the four corners in a rectangle, making sure the angles are as square and true as possible. Do not overstretch the fabric or you will result in a bell shape at the bottom that reduces interior space.
Make sure vent is open or closed, stovejack is open or closed, as desired. (Harder to reach once pole is up)
Insert the pole and raise the shelter.
Stake out the doors.
Stake out the seams near the doors.
Use the guylines on each end to stabilize and increase interior space.